Naša ponuda proizvoda
Istražite široku ponudu visokokvalitetne opreme za dizanje, premještanje i osiguranje tereta. Odaberite proizvode koji pružaju pouzdanost i dugotrajnost u profesionalnoj upotrebi.
Spring balanser type HW
• balancing, hanging and manipulation of various hand tools such as electric or pneumatic screwdrivers, hand marking machines, measuring instruments, etc.
Select options
This product has multiple variants. The options may be chosen on the product page
Transport trolley RX-lift
Four types:
• Type HT2046 (standard)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/16 mm
• Type HT2060 (foldable)
Capacity: 200 kg
Wheels: rubber pneumatic 260/120/20 mm
• Type HT510 (foldable, proffesional type)
Capacity: 200 kg
Wheels: solid wheel 250/50 mm
• Type HT500 (stair climbing wheels)
Capacity: 250 kg
Wheels: solid wheel 250/50 mm
Select options
This product has multiple variants. The options may be chosen on the product page
Travel end stop for hoist trolleys RX-lift
• travel end stop for hoist trolleys
• possibility of adjusting the width depending on the size of the beam
• suitable for beam profiles with a maximum width of 300 mm
• different configuration (A, B i C)
Select options
This product has multiple variants. The options may be chosen on the product page
Universal plate clamp type IPU10 Crosby
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 37 HRC (450 HB)
• jaw opening from 0 to 80 mm
• temperature of use form -40 to 100°C
• 10 year of warranty
• manufacturers web page: https://www.thecrosbygroup.com/products/lifting-clamps/vertical/standard/crosby-ipu10-vertical-lifting-clamps/?language=en
Universal plate clamp type PCD RX-lift
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 80 mm
• temperature of use form -40 to 100°C
Universal plate clamp type PCD-HRC50 RX-lift
• EN 13155
• vertical lifting and transport of the steel plates and construction
• full 180° turning range for material transfer, turning or moving
• safety lock mechanism
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 50 HRC (490 HB)
• for materials with high surface hardness (hardox 400, hardox 450, hardox 500)
• jaw opening from 0 to 50 mm
• temperature of use form -40 to 100°C
Select options
This product has multiple variants. The options may be chosen on the product page
Vertical plate clamp for stainless steel type NMVC RX-lift
• EN 13155
• vertical lifting and transporting of plates, sheets and structures made of stainless steel, aluminum, wood, marble, stone and other materials whose surface can be damaged during lifting operations
• safety mechanism
• equipped with a chain lifting master link (shackle) for flexible manipulation and lifting
• jaws (blocks) are made of anti-friction special synthetic material which ensures non-marking during lifting
• for materials where is important to ensure non-marking (non-damage) of load surface
• no minimal working load limit (WLL)
• working temperature from -10 to 60°C
Select options
This product has multiple variants. The options may be chosen on the product page
Vertical plate clamp type JCD RX-lift
• EN 13155
• vertical lifting and transport of steel plate and construction (max. side angle 15°)
• safety lock mechanism
• in case of using more clamps, use them in combination with a spreader beam which will allow the use of clamps in vertical configurations
• min. capacity is 10% max. capacity
• for materials with a a surface hardness up to 30 HRC (285 HB)
• not suitable for lifting stainless steel and copper
• jaw opening from 0 to 60 mm
• temperature of use form -40 to 100°C
Vertical rail clamp type RC RX-lift
• EN 13155
• vertical lifting, transport and manipulation of rails
• for rail sizes S49, S54, S60s, UIC60
• safety lock mechanism in close position
• practical and simple operating
• temperature of use form -20 do 100 °C
Select options
This product has multiple variants. The options may be chosen on the product page
